UPS 6kVA 10kVA High Frequency Online 220V Pure Sine Wave Battery UPS Power Supply

Product Description

6-10kVA

 

UDC 6-10K online tower UPS is suited for all business critical usage such as networks, data centers, banking and building automation. The UPS operates on the online double conversion principle offering protection from numerous power problems. It allows the flexible and simple setup of a parallel system. The ECO mode helps you save the electricity fee and maintenance bypass is convenient for maintenance.

General Features

True double-conversion

DSP technology guarantees high reliability

N+X parallel redundancy

Selectable quantity of battery for each group:16/18/20 pieces

Adjustable charging current via LCD

3-stage charging design optimizes battery performance

ECO mode operation for energy saving

Self-diagnosis at startup

Emergency power off function(EPO)

Maintenance bypass is convenient for maintenance

Generator compatible

Communications:RS-232,USB,SNMP card(Optional), Relay card (Optional)

Cold start
 

Technical Specification

MODEL			UDC S 6K	UDC H 6K	UDC S 10K	UDC H 10K
Capacity (VA/Watts)			6K / 5.4K		10K / 9K
INPUT
Nominal Voltage			220/230/240Vac(L+N+PE)
Operating Voltage Range			120Vac-276Vac
Operating Frequency Range			50Hz:45~55Hz,60Hz:54~66Hz
Power Factor			≥0.99
Bypass Voltage Range			Max.voltage: 220V:+25%(Optional +10%,+15%,+20% )
			230V:+20%(Optional +10%,+15%)
			240V:+15%(Optional +10% )
			Min. voltage: -45% (Optional -20%,-30%)
ECO Range			Same as bypass
Harmonic Distortion (THDi)			≤5%(100% non-linear load)
OUTPUT
Output Voltage			220/230/240Vac
Power Factor			0.9
Voltage Regulation			±1%
Frequency	Line Mode		±1%/±2%/±4%/±5%/±10% of the rated frequency(Optional)
	Bat. Mode		(50/60±0.1)Hz
Crest Factor			3:1
Harmonic Distortion (THDv)			≤2% with linear load
			≤5% with non-linear load
Waveform			Pure Sinewave
Transfer Time			Utility to Battery : 0ms; Utility to Bypass: 0ms
EFFICIENCY
Efficiency			Up to 94%
BATTERY
Battery Voltage			Selectable Voltage: ±96/108/120Vdc
Typical Recharge Time			6-8 hours (To 90% capacity)
Charging Current			Maximum current 10A
PROTECTION
Overload		Line Mode	Load≤125%: last 5min;≤150%: last 1min;>150% 200ms turn to bypass mode
		Bypass Mode	40A(Input breaker)		60A(Input breaker)
Short Circuit			Hold Whole System
Overheat			Line Mode: Switch to Bypass; Backup Mode: Shut down UPS immediately
Battery Low			Alarm and Switch off
INDICATORS
Audible & Visual Alarms			Line Failure, Battery Low, Overload, System Fault
Status LED & LCD Display			Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault
Parameters On The LCD Panel			Input/Output Voltage, Input/Output Frequency, Load Level, Battery Level,  Inner Temperature & Remaining    Battery Backup Time
MANAGEMENT
Communication Interface			RS-232,USB,Parallel card(Optional), SNMP card(Optional), Relay card (Optional)
ENVIRONMENT
Operating Temperature			0ºC~40ºC
Storage Temperature			-25ºC~55ºC
Humidity Range			0~95% (Non-condensing)
Altitude			< 1500m
Noise Level			<55dB
PHYSICAL
Dimension W×D×H (mm)			250×502×616	220×481×438	250×502×616	220×481×438
Net Weight (kg)			62	18	64	20
STANDARDS
Noise Suppression			Complies with EN62040-2
Safety			IEC/EN62040-1,IEC/EN60950-1
EMC			IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,
			IEC61000-4-5,IEC61000-4-6,IEC61000-4-8
BATTERY PACK
Model			EXB±120V
Battery type& Max.quantity			7Ah×40/9Ah×40
Dimensions W×D×H (mm)			250×502×616
Net Weight (kg)			125.8/138